Wired Home Security System Parts
On this page of our website is information on Wired Home Security System Parts.
It is important to remember that having good quality parts and wiring around your home is essential to the safety and protection of your home. Intruder alarm wiring is mainly used to connect together the various components such as the sensors, monitors and cameras, and the central control panel.
The wire that is commonly used is called quad wire which has four wires within a plastic sheath. This quad wire is used to connect together various home security system devices.
The entire security system is reliant upon the wiring being installed in the correct way. Therefore you need to take some time in doing this. Also remember a few key points.
Any low voltage wiring should run parallel to the AC power cables and there should be at least a twelve inch gap between the two. All of the wires should end in the alarm or control panel that is grounded to a true earth ground. Take note that when the security wires and cables cross with AC power wires, this crossover needs to be at a 90 degree angle.
In terms of video cameras, an RG-59 or RG-6 coaxial cable which has a 95% copper braid should be used. Be aware of the guidelines set out by the National Fire Protection Association, the National Electrical Code and the National Fire Alarm Code. An example of their guidelines are that a #22 gauge wire is the smallest wire to be used when wiring up any home security systems.
If you are connecting motion sensors, then you should use two wires of 12v-16v DC and another two wires for the alarm circuit. Any sensors that are installed in the home should be connected using low voltage wires which is connected through walls to the central controller termination strip.
An RG-6 cable and an F-Type coaxial connector needs to be used in running the wires from the cameras to the monitors. Be sure to select the right locations for installing security cameras so that there are no obstructions to their line of sight.
Wired Camera Home Security System
On this page of our website is information on Wired Camera Home Security System.
There are a number of things you can use when installing a wired camera home security system. YOu can use monitors which will display video feeds from the various cameras that you will have placed around your home in various places. You will probably find that a security monitor will have a much better resolution than a standard TV receiver.
As mentioned above you will need to install security cameras at various places around your home, you really need to think about where you will place the security cameras for the best coverage of your home. Try to cover any possible entrance points to your home and make sure there aren’t any objects in the line of sight of the camera. You will also need to be aware of decorating your house in the future because it is easy to forget about the security cameras. Try to get into the habit of checking the feed from the security cameras on a regular basis to ensure they are working properly.
Many home security experts will say that the camera is the most integral part of a security system. Because of this it is important to take care when choosing which camera system to buy. Here are a few tips and pieces of advice to consider before buying a camera system.
Before you go to buy the cameras, take a walk around your home and see how many cameras you will need. Also will you need any cameras placed outside your home? If so then these will need to be capable of withstanding the various weather conditions.
Do you need to be able to have an audio option on the camera as well so that you can record sound as well as picures? Mostly this option will not be needed apart from certain circumstances.
You also need to decide whether to buy cameras that record colour or black and white images.
Another part of a wired camera home security system is a type of cabling that is called coaxial. This is simply used to transmit video imformation between the security cameras and the monitors.
It is worth noting that security camera systems that broadcast in colour are more expensive than black and white systems. But bear in mind that black and white camera systems are the better option for night time recording unless the area is well lit up.
Some of the latest models of camera will switch between coloured images during the day and will change to black and white at night using special filters.
